Click on the image to check the artwork
Cheap 6060 metal engraving machine for engraving stamp and mould
Detailed parameters:
Machine body |
Whole Cast iron body |
Working area(XYZ axis) |
600*600*150mm |
Z axis feeding height |
180mm |
X Y Z guide |
HIWIN/PMI 20mm linear square guide |
X Y Z axis drive |
TBI High precision ball screw |
X Y Z Axis precision |
0.01mm |
Repositioning precision |
0.01mm |
Spindle |
2.2kw 24000rpm water cooling spindle |
Inverter |
2.2kw inverter |
Machine Voltage |
AC 220V 50-60HZ |
Working speed |
12000mm/min |
Feeding speed |
6000-8000mm/min |
Driving mode |
Stepper motors and Leadshine M860H drivers |
Control system |
PC based NCstudio control system |
Software compatible |
Master Cam,UG,Ucancam, TYPE3,ARTCAM |
Lubrication system |
Auto lubrication system |
Command |
G code |
Machine dimensions |
1400*1500*1500mm |
Machine weight |
550KG |
The accessories with the machine as following:
Spanners |
one set |
Clamps |
one set |
Water pumps |
two |
PCI CARD |
One piece |
SOFTARE |
ONE CD |
ENGRAVING BITS |
ONE SET(10PCS) |
COLLETS |
2PCS |
Machine pictures:
Samples:
Machine Packages:
